Hostaform C9021 SW
About
Hostaform C9021 SW
Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNS, 02-002, K10 POM copolymer Injection molding type, special modified with anti-friction additives for prevention of squeaking noise; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. UL-registration in natural and black and a thickness more than 1.5 mm as UL 94 HB. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min for a thickness more than 1,5 mm.
Ranges of applications: For sliding combinations with low wear and low coefficient of friction, prevents squeaking noise. UL = Underwriters Laboratories (USA) FMVSS = Federal Motor Vehicle Safety Standard (USA)
Technical properties
| Brand | Hostaform |
| Producer | Celanese |
| Polymer Type | POM COPO |
| Filler | Unfilled |
| Form | Granules |
| Technology | Injection Moulding |
| Features | Lubricated • Noise Damping • Alkali Resistant • Chemical Resistant • Friction, Low • Solvent Resistant • Wear Resistant • Hydrolysis Resistant • Fuel Resistant |
| Quality | Prime |
| Density (g/cm³) | - |
| Flow Rate (g/10 min) | - |
| Flame Rating | - |
| Notched Izod Impact ASTM 256 (J/m) | - |
| Notched Izod Impact ISO 180 (kJ/m²) | - |
Documents
+65 6848 4650 | +86 21 3159 5891
info@acumenengineering.com
Copyright © 2025 Acumen. All rights reserved. Member of the Ravago Group