Bormed HF840MO

About

Bormed HF840MO

Bormed HF840MO is a resin intended for evaluation for use in Healthcare applications.

Bormed HF840MO is a polypropylene homopolymer modified with a slip agent and typically used in injection moulding. It is characterized by a good processability and an easy de-moulding. Products produced from Bormed HF840MO are characterised by a controlled low friction, good physical properties and low warpage because of the narrow molecular distribution. Bormed HF840MO can be sterilised with ethylene oxide or steam.

Applications
Bormed HF840MO has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HF840MO .

• Disposable syringe barrels
• Needle cover
• Catheter connections
• Aerosol valves
• Closures

This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure.

Special Features

• Easy processing
• Low friction

Recommended markets and applications

Technologies

Documents