Sabic HDPE F04660
About
Sabic HDPE F04660
SABIC HDPE F04660 is a homopolymer film grade with a broad processing window and high stiffness. It has good moisture barrier properties and can be blended with LDPE and LLDPE to improve film strength and rigidity.
SABIC HDPE F04660 is a high density polyethylene blow moulding grade for high rigidity, good toughness and processability. These properties offer bottles to be made at lower weight with good top load strength.
Typical applications
- Blown Film: SABIC HDPE F04660 is typically used for applications where high stiffness is required. It can be used in the middle layer in a coex structure or blended with LDPE and LLDPE to increase stiffness and mechanical properties. It has good water vapor barrier properties required for certain food packaging.
- Blow Moulding: SABIC HDPE F04660 can be used in hollow thinwalled parts and profile extrusions. It is not recommended for packaging environmentally active materials such as soaps, detergents, shampoos, etc.
This product is not intended for and must not be used in any pharmaceutical/medical applications.
Barrier Resin
Density, High
Food Contact Acceptable
Homopolymer
Processability, Good
Rigidity, High
Stiffness, High
Toughness, High
Technical properties
| Brand | Sabic HDPE |
| Producer | Sabic |
| Polymer Type | HDPE |
| Filler | Unfilled |
| Form | Granules |
| Technology | Extrusion Blow Moulding • Extrusion Blown Film • Extrusion Profile |
| Features | Food Contact Acceptable • Barrier Resin • Homopolymer • Processability, Good • Rigidity, High • Toughness, High • Density, High • Stiffness, High |
| Quality | Prime |
| Density (g/cm³) | - |
| Flow Rate (g/10 min) | - |
| Flame Rating | - |
| Notched Izod Impact Strength (kJ/m²) | - |
| Notched Izod Impact (J/m) | - |
Documents
+65 6848 4650 | +86 21 3159 5891
info@acumenengineering.com
Copyright © 2025 Acumen. All rights reserved. Member of the Ravago Group